Rocky Creek MotoPressor Tyre Repair Plugs

Rocky Creek MotoPressor Tyre Repair Plugs

Set of 5 puncture repair plugs. Plug length 185mm and diameter 3.5mm. Once removed from the packaging, fold the plugs in half and store them in the back of the sheath of the MotoPressor Tyre Repair Tool.

• Plug Length: 185mm
• Plug Diameter: 3.5mm

Instructions:

1. Unfold the Pliers from the tool and remove the object from your tyre. NB: Make a note of the angle the object ha punctured the tyre.
2. Unfold the reamer. Slide the knife from the tool and put it to one side. Use the reamer to clean out the puncture hole.
3. Unfold the insersion tool and thread a repair cord through the eye of the insertion tool pulling the cord through until the eye sits in the middle of the cord.
4. Push the insertion tool all the way into the hole and rotate the tool one and a half times.
5. Gently pull the tool out until the tip of the insertion tool clears the tyre.
6. Use the detached knife to trim the cord FLUSH with the tyre. Your puncture is now fixed.